Butt elbow Long PE100 PN 10 fi 63 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 15 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Butt elbow Long PE 100 PN 10 SDR 17 with diameter fi 90mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 75 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 110 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 125 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 125mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 140 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 160 angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 160mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 180 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 180mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 200 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 200mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 225 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 225mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 250 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 250mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 280 Angle 90 °
The butt elbow of the long PE 100 is PN 10 SDR 17, with a diameter of fi 280mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 315 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 diameter fi 315mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 355 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with the diameter fi 355mm, the angle 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 400 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 400mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 450 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 450mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 500 angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 500mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 560 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 560mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 630 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 560mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 75 Angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of 75mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 45 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 110 Angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 110mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 125 Angle 45 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 125mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 140 angle 45 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 160 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 160mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 180 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 180mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 200 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 200mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.