PE HD Butt Fittings

PE HD Butt Fittings

Butt elbow Long PE100 PN 10 fi 63 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 15 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Butt elbow Long PE 100 PN 10 SDR 17 with diameter fi 90mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 16 fi 32 Angle 15 °
Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 16 fi 32 angle 30 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 32mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 16 fi 20 angle 45 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 20mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 16 fi 20 Angle 90 °
Butt Knee Long PE 100, PN 16 SDR 11 diameter fi 20mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 75 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 63 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 Angle 90 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 angle 60 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 angle 45 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 angle 30 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 Angle 22 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Molted Bow PE100 PN 16 fi 32 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 90 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Parallel Tee PE100 PN 16 fi 20mm
The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Reducer Tee PE100 PN 10 fi 63/50mm
Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 63/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Cap (cover cap) PE100 PN 10 fi 50mm
Cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Cap (cover cap) PE100 PN 16 fi 20mm
The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 110 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 125 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 125mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Butt elbow Long PE100 PN 10 fi 140 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Parallel tee PE100 PN 10 fi 63mm Angle 45 °
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.