Internal sewer knee with PP

Knee

Wide choice of PP internal sewage elbows with different dimensions and operating parameters for installation of sewage and ventilation systems, draining of domestic and commercial sewage. It consists of knee diameters ranging from fi 32mm to fi 110mm in grey or white. 

Sewer Knee fi 110 angle 90 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 angle 67 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 angle 45 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 angle 30 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm, an angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining dirt inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 Angle 22 degree
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 22 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 Angle 15 degree
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 75 angle 90 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 75 angle 67 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 75 angle 45 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 75 angle 30 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm, an angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 50 angle 90 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 50 angle 67 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Sewer Knee fi 50 angle 45 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Sewer Knee fi 50 angle 30 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 50 angle 22 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 22 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 50 angle 15 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Sewer Knee fi 40 angle 90 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 40 angle 45 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Knee fi 32 angle 90 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Sewer Knee fi 32 angle 67 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Sewer Knee fi 32 angle 45 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Sewer Knee fi 32 angle 30 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Sewer-Reducing elbow fi 110/50 angle 90 degrees
Pressure-reducing elbow with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining Impurities inside the building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >