PP Sewer Fittings from fi 32 to fi 110mm

Sewer Fittings

The fittings in the internal sewage system of PP are intended for indoor installation. The system is based on grey or white fittings in diameters from fi 32mm to fi 110mm. Durability and usability make our products widely used in residential and general construction.

Sewer reduction fi 110/75
Sewer reduction with a diameter of fi 110/75mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
zł2.38
Sewer four fi 110/110 angle 90 degrees
The sewer four with a diameter of fi 110/110mm, with a wall of 2, 7mm, an angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
zł8.52
Sewer compensator fi 110 L-250
The sewer compensator with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to regulate the length of the pipeline, draining impurities inside the building. The compensator with gasket made of the highest quality plastic, is durable and resistant to heat.
zł3.36
Sewer Fitting FI 110
The sewer fitting with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, is durable and resistant to heat. 
zł3.43
Aerator Sewer fi 110
Aerator sewer with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to compensate for the pressure in the sewage system, draining the impurities inside the building. Aerator made of the highest quality plastics, it is durable and resistant to heat.
zł5.04
On sale!
Sewer Knee fi 110 angle 90 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
zł2.47
Fi 110 Sewer
The sewer system with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
zł3.50
Sewer Tee fi 110/110 angle 90 degrees
Sewer tee with a diameter of fi 110/110mm, with a wall of 2, 7mm angle 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed for joining sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
zł4.38
Sewer Plug FI 110
The sewer plug with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
zł1.48
Sewer attacher fi 110x124 cast iron
The sewer, cast iron with a diameter of fi 110/124mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for the installation of internal sewers, draining impurities in the building. The high-quality plastic attacher is durable and heat resistant.
zł5.38
Sewage Cleaning-Fi 50
A sewer cleaner with a diameter of 1, 8mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining impurities within the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
zł2.76
Sewer reduction fi 110/50
Sewer reduction with a diameter of fi 110/50mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
 
zł1.70
Sewer four fi 110/110 angle 45 degrees
The sewer four with a diameter of fi 110/110mm, with a wall of 2, 7mm, an angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
zł11.34
Sewer compensator fi 50 L-250
The sewer compensator with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to regulate the length of the pipeline, draining impurities inside the building. The compensator with gasket made of the highest quality plastic, is durable and resistant to heat.
zł2.00
Sewer Fitting fi 75
The sewer fitting with a diameter of fi 75mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, it is durable and resistant to heat.
 
zł2.64
Aerator Sewer fi 50
The sewer aerator with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to compensate for the pressure in the sewage system, draining the impurities inside the building. Aerator made of the highest quality plastics, it is durable and resistant to heat.
zł2.88
Sewer Knee fi 110 angle 67 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
zł2.47
On sale!
Fi 50 Sewer

The sewer system with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
zł3.13
Sewer Tee fi 110/110 angle 67 degrees
Sewer tee with a diameter of fi 110/110mm, with a wall of 2, 7mm angle 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed for joining sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
zł4.41
Sewer Plug fi 75
The sewer plug with a diameter of fi 75mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
zł1.42
Sewer attacher fi 110x124 cast iron with gasket
The sewer, cast iron (with gasket) diameter FI 110/124mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for the installation of internal sewer, draining impurities in Building. The seal is made of the highest quality plastic, durable and heat resistant.
zł6.78
Sewage Cleaning-Fi 75
The sewer cleaner with a diameter of 75mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining the impurities inside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
zł4.15
Sewage Cleaning-Fi 110
Sewage cleaner with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining impurities inside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
zł4.38
Sewer reduction fi 75/50
The sewer reduction with a diameter of fi 75/50mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
zł1.69
Sewer four fi 110/50 angle 90 degrees
The sewer four with a diameter of fi 110/50mm, with a wall of 2, 7mm, an angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
zł5.97
Fi 160 Sewer
The sewer system with a diameter of fi 160mm, with the Polish standard AT-06-0602 B, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
zł7.20
Sewer Fitting FI 50
The sewer fitting with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, is durable and resistant to heat. 
zł1.80
Sewer Knee fi 110 angle 45 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
zł2.39
Sewer Tee fi 110/110 angle 45 degrees
Sewer tee with a diameter of fi 110/110mm, with a wall of 2, 7mm angle 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed for joining sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
zł4.50
Sewer Plug fi 50
Sewer plug with diameter fi 50mm, with wall 1.8 < SPAn >MM, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
zł0.87