Internal sewerage-PP and PVC pipes and fittings

Internal Sewer System

Internal sewage with PVC and PP is designed for installation of sewer inside the building. The system is based on pipes and fittings in grey or white in diameters from fi 32mm to fi 110mm. Durability and usability make our products widely used in residential and general construction.

Sewer pipe with PP-H fi 110x2, 7x250mm
Sewer pipe with a diameter of 2, 7mm with a length of 250mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.
Sewer pipe with PP-H fi 75x1, 9x250mm
Sewer pipe with fi 75mm diameter, with 1, 9mm wall with 250mm length, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer pipe with PP-H fi 50x1, 8x250mm
Sewer Pipe diameter fi 50mm, with Wall 1, 8mm with a length of 250mm, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę. 
Sewer pipe with PP fi 40x1, 8x250mm
Sewer pipe, fi 40mm diameter, with wall 1, 8mm with a length of 250mm, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer pipe with PP fi 32x1, 8x250mm
Sewer pipe with a diameter of 1, 8mm with a length of 250mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer attacher fi 110x124 cast iron
The sewer, cast iron with a diameter of fi 110/124mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for the installation of internal sewers, draining impurities in the building. The high-quality plastic attacher is durable and heat resistant.
Fi 110 Sewer
The sewer system with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Aerator Sewer fi 110
Aerator sewer with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to compensate for the pressure in the sewage system, draining the impurities inside the building. Aerator made of the highest quality plastics, it is durable and resistant to heat.
Sewer compensator fi 110 L-250
The sewer compensator with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to regulate the length of the pipeline, draining impurities inside the building. The compensator with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer four fi 110/110 angle 90 degrees
The sewer four with a diameter of fi 110/110mm, with a wall of 2, 7mm, an angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
Sewer Plug FI 110
The sewer plug with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Sewer Fitting FI 110
The sewer fitting with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, is durable and resistant to heat. 
Sewer reduction fi 110/75
Sewer reduction with a diameter of fi 110/75mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
Sewage Cleaning-Fi 50
A sewer cleaner with a diameter of 1, 8mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining impurities within the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer Tee fi 110/110 angle 90 degrees
Sewer tee with a diameter of fi 110/110mm, with a wall of 2, 7mm angle 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed for joining sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Sewer Knee fi 110 angle 90 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
PVC Sewer pipe fi 32x1, 8x2000mm
The sewer pipe with a diameter of fi 32mm, with a wall of 1, 8mm with a length of 2 meters, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in white, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
PVC Sewer pipe fi 50x1, 8x3000mm












The sewer pipe with a diameter of 1, 8mm with a length of 3 meters, with Polish standard PN-EN 12200, made of PVC-U polyvinyl chloride in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
PVC Sewer pipe fi 75x1, 8x3000mm
The sewer pipe with a diameter of 75mm, with a wall of 1, 9mm with a length of 3 meters, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
PVC Sewer pipe fi 110x2, 2x6000mm
Sewer pipe with a diameter of 2, 2mm with a length of 6 meters, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
Sewer pipe with PP-H fi 110x2, 7x315mm
Sewer pipe, diameter fi 110mm, with a wall of 2, 7mm with a length of 315mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.
Sewer pipe with PP-H fi 75x1, 9x315mm
Sewer pipe, fi 75mm in diameter, with a wall of 1, 9mm with a length of 315mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer pipe with PP-H fi 50x1, 8x315mm
Sewer pipe, fi 50mm diameter, with 1, 8mm wall with a length of 315mm, with Polish norm PN-EN 1451, made of polypropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer pipe with PP fi 40x1, 8x315mm
Sewer pipe, diameter fi 40mm, with a wall of 1, 8mm with a length of 315mm, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer pipe with PP fi 32x1, 8x315mm
Sewer pipe, diameter fi 32mm, with a wall of 1, 8mm with a length of 315mm, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Sewer attacher fi 110x124 cast iron with gasket
The sewer, cast iron (with gasket) diameter FI 110/124mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for the installation of internal sewer, draining impurities in Building. The seal is made of the highest quality plastic, durable and heat resistant.
Fi 50 Sewer

The sewer system with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Aerator Sewer fi 50
The sewer aerator with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to compensate for the pressure in the sewage system, draining the impurities inside the building. Aerator made of the highest quality plastics, it is durable and resistant to heat.
Sewer compensator fi 50 L-250
The sewer compensator with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to regulate the length of the pipeline, draining impurities inside the building. The compensator with gasket made of the highest quality plastic, is durable and resistant to heat.
Sewer four fi 110/110 angle 45 degrees
The sewer four with a diameter of fi 110/110mm, with a wall of 2, 7mm, an angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.