Best sellers

Holder fi 32mm
The holder fi 32mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Out-of-Stock
Welded elbow PP-RCT fi 20mm angle 45 degrees
Welded knee PP-RCT diameter fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Pipe PEX/AL/PE fi 20x2, 0mm
Multilayer pressure pipe with a diameter of fi 20mm, with a wall of 2, 0mm with a maximum pressure of 1 MPa (10 bar), in a standard length of 100MB, with the Polish standard PN-EN ISO 21003. Made of polyethylene (PEX), aluminium (AL), polyethylene (PE), white, it is intended for installation in systems for the transmission of water for consumption, for economic purposes and in heating systems (CO
Out-of-Stock
Elbow with internal thread PP-R fi 20x1/2
Elbow with internal thread fi 20x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
PVC Sewer pipe fi 110x2, 2x315mm
Sewer pipe with a diameter of 2, 2mm with a length of 315mm, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
Out-of-Stock
Welded nipple PP-R fi 25mm angle 90 degrees
Welded nipple with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Out-of-Stock
PVC Sewer pipe fi 50x1, 8x250mm
The sewer pipe with a diameter of 1, 8mm with a length of 250mm, with Polish standard PN-EN 12200, made of PVC-U polyvinyl chloride in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
Out-of-Stock
with external thread PP-R fi 40x1, 1/4
with external thread diameter fi 40x1, 1/4, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Sewer Tee fi 110/50 angle 45 degrees
The sewer tee with a diameter of fi 110/75mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Welded pipe PP-R PN-20 fi 16mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 16mm, with a wall of 2, 7mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes a
Threaded PE Coupling GW fi 20x1/2
PE threaded Coupling PN 10 SDR 17 with a diameter of fi 20x1/2 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is intended for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting the coupling with the PE tube is done with a clamping ring, which covers and presses the pipe afte
Out-of-Stock
Threaded Nipple GZ fi 20x3/4
A coupling with an external thread PE twisted PN 10 SDR 17 with a diameter of fi 20x3/4 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is intended for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting the coupling with the PE tube is done with a clamping ring, which covers
Out-of-Stock
Welded elbow PP-RCT fi 20mm angle 90 degrees
Welded knee PP-RCT diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Out-of-Stock
Fi 110 Sewer
The sewer system with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Out-of-Stock
with internal thread PP-R fi 25x1/2
with Internal thread fi 25x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Out-of-Stock
PVC Sewer pipe fi 50x1, 8x315mm
The sewer pipe with a diameter of 1, 8mm with a length of 315mm, with Polish standard PN-EN 12200, made of PVC-U polyvinyl chloride in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
Out-of-Stock
Sewer reduction fi 110/50
Sewer reduction with a diameter of fi 110/50mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
 
PE Tee Twisted GW fi 32x3/4 "
A tee with PE female threaded PN 10 SDR 17 with a diameter of fi 32x3/4 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is designed for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting Tees with PE tube is done with a clamping ring, which covers and presses the pipe after t
Out-of-Stock
Welded Tee PP-RCT fi 20mm angle 90 degrees
Welded Tee PP-RCT with diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The tee made of the highest quality plastics is durable and resistant to heat. 
PP-R fi 20/32mm Welded reduction
Welded reduction with a diameter of fi 20/32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Welded elbow PP-R fi 40mm angle 45 degrees
Welded knee diameter fi 40mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Sewer Knee fi 32 angle 45 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
PP fi 160 Sewage filler
The sewer plug with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to blind the ends of the sewage systems outside the building. The cap is made of the highest quality plastic, durable and resistant to heat.
Out-of-Stock
Welded PP-R fi 40mm
Welded with a diameter of fi 40mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Welded pipe PP-R PN-10 fi 25mm
Welded pipe PPR PN-10 SDR-11o diameter fi 25mm, with a wall of 2, 3mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Out-of-Stock
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Out-of-Stock
PVC drain pipe without holes fi 80 (coil 50 MB)
Drainage pipe without holes with a diameter of 80mm with a length of 50MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for dewatering of land and areas around buildings and fields of sports pitches, farmlands, Etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
Sewer Plug fi 50
Sewer plug with diameter fi 50mm, with wall 1.8 < SPAn >MM, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Sewer reduction fi 50/32 angle 90 degrees
Sewer reduction with a diameter of fi 50/32mm, with a wall of 1, 8mm, angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "left"> 
Sewer Knee fi 32 angle 67 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Drain plug PP DN 50
A drain plug with a diameter of fi 50, with a wall of 1, 8mm, with Polish norm, ETC. AT/18-2014-0025-02, made of polypropylene (PP) in grey or orange, is intended for sealing the ends of drainage systems draining the land. The cap made of high-quality plastics guarantees protection against the inflow of water in all the construction works.
Out-of-Stock
Ball valve PP-R fi 20mm
A ball valve with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Sewer pipe with PP-H fi 50x1, 8x500mm
Sewer Pipe diameter fi 50mm, with 1, 8mm wall length 500mm, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę. 
Out-of-Stock
Mijanka PP-R fi 20mm
A mijanka with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The Mijanka made of the highest quality plastics is durable and resistant to heat. 
PP-R plug fi 25mm
PPR fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant.