Best sellers

Multilayer pressure pipe with a diameter of fi 16mm, with a wall of 2, 0mm with a maximum pressure of 1 MPa (10 bar), in a standard length of 200MB, with the Polish standard PN-EN ISO 21003. Made of polyethylene (PEX), aluminium (AL), polyethylene (PE), white, it is intended for installation in systems for the transmission of water for consumption, for economic purposes and in heating systems (CO

Welded Knee diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded STABI pipe with glass fibre PN-20 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tub

Welded Knee diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

STABI pipe welded with glass fibre PN-20 with a diameter of fi 25mm, with a wall of 3, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are

Welded with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 

The holder fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 

Welded Knee diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

The pressure pipe PN 10 SDR 13.6 with a diameter of fi 32mm, with a wall of 2, 4mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. Fo

Welded tee with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

The holder fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 

Welded with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 

Welded STABI pipe with glass fibre PN-20 with a diameter of fi 32mm, with 4, 4mm wall length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are shipp

Knee hanger with inner thread diameter fi 20x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 

with external thread diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 

Welded Knee diameter fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Pressure Pipe PN 12.5 SDR 11 with a diameter of fi 32mm, with a wall of 3, 0mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. For wh

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 

Welded pipe PPR PN-20 SDR-6 with a diameter of fi 20mm, with a wall of 3, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and a central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 

STABI pipe welded with glass fibre PN-20 with a diameter of fi 50mm, with a wall of 6, 9mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 

Welded knee diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Welded nipple with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 

Pressure Pipe PN 12.5 SDR 11 with a diameter of fi 20mm, with a wall of 2, 0mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. For wh

Welded tee with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded pipe PPR PN-20 SDR-6 with a diameter of fi 50mm, with a wall of 8, 3mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub

Welded with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 

Welded knee diameter fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

with external thread diameter fi 32x1 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 

The sewer pipe with a diameter of 2, 2mm, with a length of 2m, with the Polish standard PN-EN 12200, made of PVC-U polyvinyl chloride in grey, is suitable for draining impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.

The sewer plug with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewer systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.

The sewer pipe with a diameter of fi 110mm, with a wall of 2, 2mm with a length of 1 meter, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.

Thermal insulation cover with an inner diameter of 28mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene in grey, produced in parts 2m, is designed for insulation of sanitary pipes, heating, Air conditioning, refrigeration and piping of steel, copper and plastic, installed in residential, administrative and industrial buildings. Thermal insulation